Designing the Bond - Webinar Registration

Overview

Join us for our upcoming webinar
'Designing the Bond'.

The science and technology of adhesives has advanced greatly in the past few decades and continues to advance every day. While there are several ways to design and manufacture products, 3M adhesives and tapes offer unique benefits compared to welding and mechanical fastening.
Oftentimes when transitioning to an adhesive bond from a traditional mechanical or thermal attachment method, it is necessary to redesign the joint to accommodate better tensile, compression and shear loading, removing cleavage or peel. There are a few common joint configurations that perform very well for mechanical or thermal attachment but should be improved for use with an adhesive.

In our latest webinar 'Designing the Bond' we will dicuss how to design a bond which lasts to your needs.

Complete the form on the right to register for our FREE webinar.

Meet the Presenter - Chris Freebody

Chris Freebody is a 3M Application Engineering Specialist with 20 years of engineering experience. He is a Chartered Mechanical Engineer and has a degree in Mechanical Engineering with Automotive Design. His role involves working with a wide range of customers, to find the right solutions for their bonding and joining needs.

Designing the Bond webinar agenda:

• Introduction
• What are the 3 factors in the Adhesion Science?
• Diagnosing Problems
• Considerations and Factors for Adhesives
• General Design Principles
• FEA modeling
• Q&A